signal.h是C标准函数库中的信号处理部分, 定义了程序执行时如何处理不同的信号。信号用作进程间通信, 报告异常行为(如除零)、用户的一些按键组合(如同时按下Ctrl与C键,产生信号SIGINT)。
C++中的对应头文件是csignal
。
/**linux下signum.h**/
/* Signals. */
#define SIGHUP 1 /* Hangup (POSIX). */
#define SIGINT 2 /* Interrupt (ANSI). */
#define SIGQUIT 3 /* Quit (POSIX). */
#define SIGILL 4 /* Illegal instruction (ANSI). */
#define SIGTRAP 5 /* Trace trap (POSIX). */
#define SIGABRT 6 /* Abort (ANSI). */
#define SIGIOT 6 /* IOT trap (4.2 BSD). */
#define SIGBUS 7 /* BUS error (4.2 BSD). */
#define SIGFPE 8 /* Floating-point exception (ANSI). */
#define SIGKILL 9 /* Kill, unblockable (POSIX). */
#define SIGUSR1 10 /* User-defined signal 1 (POSIX). */
#define SIGSEGV 11 /* Segmentation violation (ANSI). */
#define SIGUSR2 12 /* User-defined signal 2 (POSIX). */
#define SIGPIPE 13 /* Broken pipe (POSIX). */
#define SIGALRM 14 /* Alarm clock (POSIX). */
#define SIGTERM 15 /* Termination (ANSI). */
#define SIGSTKFLT 16 /* Stack fault. */
#define SIGCLD SIGCHLD /* Same as SIGCHLD (System V). */
#define SIGCHLD 17 /* Child status has changed (POSIX). */
#define SIGCONT 18 /* Continue (POSIX). */
#define SIGSTOP 19 /* Stop, unblockable (POSIX). */
#define SIGTSTP 20 /* Keyboard stop (POSIX). */
#define SIGTTIN 21 /* Background read from tty (POSIX). */
#define SIGTTOU 22 /* Background write to tty (POSIX). */
#define SIGURG 23 /* Urgent condition on socket (4.2 BSD). */
#define SIGXCPU 24 /* CPU limit exceeded (4.2 BSD). */
#define SIGXFSZ 25 /* File size limit exceeded (4.2 BSD). */
#define SIGVTALRM 26 /* Virtual alarm clock (4.2 BSD). */
#define SIGPROF 27 /* Profiling alarm clock (4.2 BSD). */
#define SIGWINCH 28 /* Window size change (4.3 BSD, Sun). */
#define SIGPOLL SIGIO /* Pollable event occurred (System V). */
#define SIGIO 29 /* I/O now possible (4.2 BSD). */
#define SIGPWR 30 /* Power failure restart (System V). */
#define SIGSYS 31 /* Bad system call. */
#define SIGUNUSED 31
/**windows下gcc signal.h**/
#define SIGINT 2 /* Interactive attention */
#define SIGILL 4 /* Illegal instruction */
#define SIGFPE 8 /* Floating point error */
#define SIGSEGV 11 /* Segmentation violation */
#define SIGTERM 15 /* Termination request */
#define SIGBREAK 21 /* Control-break */
#define SIGABRT 22 /* Abnormal termination (abort) */
#define NSIG 23 /* maximum signal number + 1 */
View Code
static void sig_handler(int signum){
switch(signum){
case SIGUSR1:
cout<<"SIGUSR1";
stop();
break;
case SIGUSR2:
cout<<"SIGUSR2";
stop();
break;
case SIGTERM:
cout<<"SIGTERM";
stop();
break;
}
exit(0);
}
int main(){
signal(SIGUSR1,sig_handler);
signal(SIGUSR2,sig_handler);
signal(SIGTERM,sig_handler);
return 0;
}
库函数raise()
或者系统调用kill()
可以产生信号。raise()
发送一个信号给当前进程,kill()
发送一个信号给特定进程。
除了两个信号SIGKILL与SIGSTOP不能被捕获(caught)、阻塞(blocked)或者忽略,其它的信号都可以指定处理函数(handler)。一个信号的处理函数在信号到达时,被目标环境调用。目标环境挂起当前进程的执行,直到信号处理函数返回或者调用了longjmp()
。为了最大的兼容性,异步信号处理只应:
- 成功调用了
signal()
指定的函数; - 给类型为
sig_atomic_t
的对象赋值; - 把控制返回给它的调用者。
如果信号报告了进程的错误,信号处理函数应该调用abort()
, exit()
或longjmp()
。
kill():
头文件:#include
定义函数:int kill(pid_t pid, int sig);
函数说明:kill()可以用来送参数sig 指定的信号给参数pid 指定的进程。参数pid 有几种情况:
1、pid>0 将信号传给进程识别码为pid 的进程.
2、pid=0 将信号传给和目前进程相同进程组的所有进程
3、pid=-1 将信号广播传送给系统内所有的进程
4、pid<0 将信号传给进程组识别码为pid 绝对值的所有进程参数 sig 代表的信号编号可参考附录D
返回值:执行成功则返回0, 如果有错误则返回-1.
错误代码:
1、EINVAL 参数sig 不合法
2、ESRCH 参数pid 所指定的进程或进程组不存在
3、EPERM 权限不够无法传送信号给指定进程
范例
#include <unistd.h>
#include <signal.h>
#include <sys/types.h>
#include <sys/wait.h>
main()
{
pid_t pid;
int status;
if(!(pid= fork()))
{
printf("Hi I am child process!n");
sleep(10);
return;
}
else
{
printf("send signal to child process (%d) n", pid);
sleep(1);
kill(pid, SIGABRT);
wait(&status);
if(WIFSIGNALED(status))
printf("chile process receive signal %dn", WTERMSIG(status));
}
}
执行:
sen signal to child process(3170) Hi I am child process! child process receive
signal 6
View Code
原文链接: https://www.cnblogs.com/dk666/p/7411919.html
欢迎关注
微信关注下方公众号,第一时间获取干货硬货;公众号内回复【pdf】免费获取数百本计算机经典书籍
原创文章受到原创版权保护。转载请注明出处:https://www.ccppcoding.com/archives/258678
非原创文章文中已经注明原地址,如有侵权,联系删除
关注公众号【高性能架构探索】,第一时间获取最新文章
转载文章受原作者版权保护。转载请注明原作者出处!